โ RNS 1.4.2 released https://pypi.org/project/rns/
๐ฌค rns.recipes
top
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ Cheap RNode DIY Boards โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
Started by N ยท 4mo ago
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-1
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ N #1 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
What is the most affordable boards for building RNodes? Are there any good DIY boards
that people have had success with that lowers the per-unit price?
I like the Heltec V4, but I want to find/build a board for cheaper. Any suggestions?
โ 0 โ 0 โค 2
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-2
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Anonymous #2 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
Found here: https://github.com/varna9000/micropython-reticulum
The Seeed XIAO ESP32S3 + Wio-SX1262 sound really cheap! Not sure about the project
though. 6s processing time for a single announc verification.. sounds really slow.
โ 1 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-3
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ joakim #3 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
[FakeTec](https://github.com/gargomoma/fakeTec_pcb) is cheap when building 5+. I don't
now if anybody's gotten it to work yet, but there is [this
PR](https://github.com/liberatedsystems/RNode_Firmware_CE/pull/98) that appears to add
support for it. I'm slowly working on my own board based on the earlier more basic
version, with [E22-x00M22S](https://www.cdebyte.com/products/E22-900M22S) (either the 433
MHz or 868/915 MHz version) instead of HT-RA62. Should be roughly the same price, in the
region of $10.
You can go even cheaper than that on a breadboard:
https://unsigned.io/guides/2022_01_26_how-to-make-your-own-rnodes.html
โ 3 โ 0 โค 1
โ INFO โ Identify to this node to post. How?
bottom